What is a drive away kit?
A drive away kit is a simple product designed to allow an Outdoor Revolution drive away awning to be erected before you attach it to which ever motorhome or campervan etc that you drive.
How does it work (see Diagram)
Simply slide the narrower length of twin piping into the channel of the wind-out awning. Now slide the figure of 8 plastic strips onto the opposite side of the same twin piping section. The opposite side of the figure 8 simply slides onto the piping sewn onto the back of your awning.
Large fixing Kit, Product Code OR531.
Designed to slide into 6mm awning rail.
(Fits, Movelite XL Nomad 3, Nomad 2+2, Navigator)
Simply slide the length of twin piping into the awning rail. Now slide the figure of 8 plastic strips onto the opposite side of the same twin piping section. The opposite side of the figure 8 slides onto the piping sewn onto the back of your awning.
What if You do not have any awning rail fitted?
All Outdoor Revolution Drive away awnings are fitted with either detachable stability straps or guylines (depending on model) that simply go over the roof of the motorhome and peg in the ground at the opposite side allowing the ‘tunnel’ to be formed from the awning to the vehicle.
Actual shipping costs and delivery times are shown in the shopping basket, based on the information below. Delivery to the UK Mainland on a 2-3 working day service level is charged at £9.50 for the first item ordered with a subsequent charge of £1.00 for every item ordered thereafter. There is a maximum delivery charge of £20.00 per order.
This supplier does not deliver to the Rest of the World.
This item will only be delivered to the Cardholder's Address.
Optimised for viewing in IE 5 and later or Firefox 1.0 and later at 1024 x 768. Managed by eDirectory.co.uk copyright 1997 - 2008